Overhead fault monitoring

Koala TS300S on the S&C TripSaver II recloser: fault monitoring

The TripSaver II single-phase recloser is S&C's; the Koala TS300S sensor is ours. It detects the recloser's temporary and permanent faults and reports them to the operations center.

Koala TS300S + TripSaver II (S&C)

What it is for

Know what happened at the recloser

Reports the recloser's temporary and permanent faults in real time, with the fault type, without waiting for the customer's call.

Identify the phase and keep an eye on the unit

It is configured by software to identify the installation phase and also reports temperature and battery level.

Forget about maintenance

Internal lithium-thionyl chloride battery with 10 years of autonomy. It runs on its own 24/7, outdoors (IP65), and installs with adhesive mounting.

Each device does its own job: the TripSaver II recloser, from S&C, acts in the field; the Koala TS300S sensor, ours, monitors it and reports. The data on this page refers to the sensor. The same Koala, in its fuse version, has its own page.

Koala TS300S + TripSaver II (S&C) 2/6
Koala TS300S + TripSaver II (S&C) 3/6
Koala TS300S + TripSaver II (S&C) 4/6
Koala TS300S + TripSaver II (S&C) 5/6
Koala TS300S + TripSaver II (S&C) 6/6

Technical specifications

General

Equipment
Koala TS300S sensor on the TripSaver II single-phase recloser (S&C)
Detects
Temporary and permanent faults
Reports
Fault type, temperature and battery level
Frequency
50 / 60 Hz
Phase identification
By software
Reset type
Automatic
Programming
At the factory

Power and environment

Power supply
Internal lithium-thionyl chloride battery
Autonomy
10 years, maintenance-free
Operation
Autonomous, 24/7
Use
Outdoor
Protection rating
IP65
Operating temperature
−15 to +65 °C
Wind resistance
Up to 150 km/h
Mounting
Adhesive

Communication and integration

Network
LPWAN: LoRaWAN or Sigfox
Range
Up to 30 km, with high device capacity
Signals to SCADA
Digital and analog
Geolocation
Visual, via API

Quality

Testing
Standard tests passed
Warranty
1 year

Specifications subject to change without notice. Final configurations are defined per project.

How it integrates

LPWAN communication

Uses LoRaWAN or Sigfox LPWAN networks, with a range of up to 30 km and high device capacity.

Platform and SCADA

Delivers digital and analog signals to SCADA systems. Automatic reset, factory programming and visual geolocation via API.

Sensor and recloser

The Koala TS300S mounts on the S&C TripSaver II recloser and reports the fault type, temperature and battery level.